3Play System Specifications

AUDIO

Inputs

• Up to four channels embedded audio supported on SDI and HD-SDI inputs
• 3 AES3/SPDIF digital Audio inputs
• 4 Balanced analog inputs per video channel
• Nominal level +4 dBu (-20dBFS), Maximum level +24 dBu

Outputs

• 4 embedded audio outputs per video output is supported on SDI and HD-SDI
• 3 AES3/SPDIF digital audio outputs
• 4 Balanced analog outputs per video channel
• Nominal level +4 dBu (-20dBFS), Maximum level +24 dBu

FORMATS

• Video is compressed using MPEG-2 VBR, I-Frame only.
• Audio is uncompressed and sampled at 48kHz, 24-bit.
• 30 hours of storage (10 hours of 3 simultaneous channels.)

STANDARDS

• HD-SDI video conforms to SMPTE 292M
• SD video comforms to SMPTE 259M and ITU-R BT.656.
• Analog audio levels conform to SMPTE RP-155.

VIDEO

Inputs

• 3 Serial Digital Inputs with HD-SDI and SDI support
• 3 Component inputs with HD and SDI support
• 3 Y/C inputs
• 3 Composite inputs

Outputs

• 3 Serial Digital outputs with HD-SDI and SDI support
• 3 Component outputs with HD and SDI support
• 3 Y/C outputs
• 3 Composite outputs

Formats

• 1080i 59.94Hz
• 1080i 50Hz*
• 720p 59.94Hz
• 720p 50Hz*
• 480i 59.94Hz
• 576i 50Hz*

3PLAY supports both 16:9 and 4:3 aspects
* Requires the multi-standard version of 3Play 100HD

GENLOCK

• Locks to HD or SD analog signals.
• Supports either tri-level or regular sync sources.

NewTek 3PLAY is slated to ship in Q1, 2009.

NOTE : All specifications are subject to change without notice

Top